JIEMS (Journal of Industrial Engineering and Management Systems)

Human resources (HR) take an important role in a company to improve product quality. Human Resources in terms of the number of people and skills possessed are factors that influence the production of quality goods/products. Productive workers are workers who are able to produce products or services in accordance with the quality that has been set in a short time. The problem with PT.X in the packing section is that the packing target has not been achieved as set by the company. Another problem is the presence of manual loads above the standard load set. Meanwhile, packing workers also complained about the hot working conditions. So that further analysis is needed to determine the physical and mental workload on the packing work of PT. X uses Workload Analysis and NASA-TLX as well as analysis of the physical work environment (temperature and lighting). The workload and conditions of the physical work environment experienced by workers will affect worker productivity. The results obtained based on measurements using the Workload analysis (WLA) method showed that the physical workload of the three employees was high with a value of 121.97%, 119.20%, 117.81%. The results of measurements using NASA-TLX indicate that the mental workload experienced by packing workers is overloaded with values of 80.67, 82.67, 80 respectively. lux, both are within the normal threshold according to the Ministry of Health standards.

Workload analysis; NASA-TLX; Illumination; Temperature

Al-bana, N. P., Zaidan, A., & Al-khairi, P. A. (2021). Analisis Pengaruh Lingkungan Kerja Fisik Terhadap Beban Kerja Mental Pekerja UMKM Pembuatan Kerupuk XYZ. (2018).

Anggraeni, L. E., & Prabowo, R. (2015). Analisis Beban Kerja Untuk Menentukan Jumlah Karyawan Optimal ( Studi Kasus : Pt . Sanjayatama Lestari Sirabaya ). Jurnal Teknik Industri, 225–232.

Cahyaningrum, D. T., Siswanto, N., & Firmanto, H. (2021). Penentuan Tenaga Kerja Optimal pada Packaging Kopi dengan Menggunakan Analisis Beban Kerja Metode Work Sampling. Jurnal Ilmiah Inovasi, 21(1), 46–49. https://doi.org/10.25047/jii.v21i1.2634

Databooks. (2021). Sektor Perdagangan Besar dan Eceran Tumbuh 4,65% pada 2021. Retrieved from https://databoks.katadata.co.id/datapublish/2022/02/17/sektor-perdagangan-besar-dan-eceran-tumbuh-465-pada-2021#:~:text=Sepanjang tahun 2021 sektor perdagangan,pertanian sebesar 13%2C28%25.

Farhana, D. H. (2020). Analisis Beban Kerja Dalam Menentukan Jumlah Tenaga Kerja Optimal Dengan Metode Workload Analysis Di PT Jaya Teknik Indonesia. Scientifict Journal of Indsutrial Engineering, 1(2), 18–22.

Handika, F. S., Yuslistyari, E. I., & Hidayatullah, M. (2020). Analisis Beban Kerja Fisik dan Mental Operator Produksi Di Pd . Mitra Sari. Jurnal Industri Dan Teknologi Terpadu, 3(2), 82–89.

Hidayat, A. D., & Elkhuluqo, I. (2017). Pengaruh Pengawasan Kinerja terhadap Produktivitas Kerja di Biro Umum Badan Narkotika Nasional. Jurnal Utilitas, 3(2), 87–94.

Irawati, R., & Carollina, D. A. (2017). Analisis Pengaruh Beban Kerja Terhadap Kinerja Karyawan Operator Pada Pt Giken Precision Indonesia. Inovbiz: Jurnal Inovasi Bisnis, 5(1), 51. https://doi.org/10.35314/inovbiz.v5i1.171

Junaedi, D., Rizkiyah, N. D., & Pratya, D. B. (2020). Determination of the Optimal Number of Workers Usingthe NASA-TLX Method in Chemical Company, Indonesia. International Journal of Engineering Research and Advanced Technology, 06(07), 51–56. https://doi.org/10.31695/ijerat.2020.3627

Kemendag. (2014). Regulasi 2014 (pp. 1--80). pp. 1--80. Retrieved from http://www.kemendag.go.id/files/regulasi/2014/03/11/7-tahun-2014-id-1398758805.pdf

Kompas. (2021). perdagangan. Retrieved from https://money.kompas.com/read/2021/12/08/184620526/apa-yang-dimaksud-dengan-perdagangan?page=all

Lestari, A., Tannady, H., & Nurprihatin, F. (2018). Analisis Produktivitas Kasir Guna Menentukan Beban Kerja Menggunakan Work Sampling pada Gerai Makanan Cepat Saji. Prosiding Seminar Rekayasa Teknologi, 578–587.

Pramesti, A., & Suhendar, E. (2021). Analisis Beban Kerja Menggunakan Metode NASA-TLX Pada CV. Bahagia Jaya Alsindo. STRING (Satuan Tulisan Riset Dan Inovasi Teknologi), 5(3), 229. https://doi.org/10.30998/string.v5i3.6528

Qoyyimah, M., Abrianto, T. H., & Chamidah, S. (2020). Pengaruh Beban Kerja, Stres Kerja dan Lingkungan Kerja Terhadap Kinerja Karyawan Bagian Produksi PT. INKA Multi Solusi Madiun. ASSET: Jurnal Manajemen Dan Bisnis, 2(1), 11–20. https://doi.org/10.24269/asset.v2i1.2548

RI, K. M. K. (2002). KEPUTUSAN MENTERI KESEHATAN REPUBLIK INDONESIA NOMOR 1405/MENKES/SK/XI/2002. 1–22.

Siregar, M. R., ArumPuspita, I., & Nugraha, F. N. (2021). Pengukuran Beban Kerja Mental Pada Proyek Sttf. 8(2), 2159–2166.

Suryaningrat, I. B., Kuswardhani, N., & Hastuti, N. R. (2021). OPTIMALISASI BEBAN KERJA PADA INDUSTRI MAKANAN MENGGUNAKAN METODE WORKLOAD ANALYSIS (Studi Kasus pada UD. MR-Jember). Jurnal Ilmiah Rekayasa Pertanian Dan Biosistem, 9(2), 118–129. https://doi.org/10.29303/jrpb.v9i2.219

Wahyuni, D., Budiman, I., Sihombing, S. N., & Sembiring, M. T. (2017). Analisis Beban Kerja dan Jumlah Pekerja pada Kegiatan Pengemasan Tepung Beras (Vol. 2017, pp. 4–6). Vol. 2017, pp. 4–6.