Identifikasi dan Eliminasi Pemborosan Aktivitas pada Proses Produksi Suku Cadang dengan Pendekatan Lean Manufacturing

Agustian Suseno, Hengky Hengky


PT. Trijaya Teknik Karawang is a manufacturing company that produces spare parts, namely the piece pivot. The increased demand make the company parties need to analyze the ability to do the production to make it more effective and efficient in order to win the competition. Preliminary observations on the production floor they still present problems that are categorized as waste. Based on it, lean manufacturing Approach used to solve these problems. First of all the waste identified by mapping the flow of production using Value Stream Mapping (VSM). Then determined the dominant waste going through weighting waste using Waste Assesment Model (WAM) with the result that the inventory is the dominant waste. Next choose a detail mapping tools with Value Stream Analyze Tools (VALSAT) and determine the cause of waste inventory with fishbone diagrams that result, the causes of waste inventory is the breakdown of the machine, the operator of conduct material handling and less nimble, the distance between the machine and the system far, the production batch manufacture. Recommendations for improvements are the application of the system production of one-piece flow with investing buying transfer dies and adds to the human resources division maintenance. The identification of the problem causing factors of the dominant waste activity, namely waste inventory using Fishbone diagrams is lack of engine maintenance because it does not have a maintenance division and the production system used is batch manufacture that produces goods in lot size so that there are WIP parts in each production process.


Lean Manufacturing; Value Stream Mapping; Waste Assesment Model; Value Stream Analyze Tools; Diagram Fishbone

Full Text:



Badan Pusat Statistik (2018) Berita Resmi Statistik Pertumbuhan Produksi Industri Manufaktur Triwulan IV-2017. Jakarta. Tersedia pada:

Doggett, A. M. (2005) “Root Cause Analysis: A Framework for Tool Selection,” Quality Management Journal, 12(4), hal. 34–45. doi: 10.1080/10686967.2005.11919269.

Fanani, Z. dan Singgih, M. L. (2011) “Implementasi Lean Manufacturing untuk Peningkatan Produktivitas (Studi Kasus pada PT. Ekamas Fortuna Malang),” in Prosiding Seminar Nasional Manajemen Teknologi XIII. Surabaya: Program Studi MMT-ITS. Tersedia pada: XIII/MI/44. Prosiding Zaenal Fanani-OK-PRINT.pdf.

Gaspersz, V. (2007) The Executive Guide to Implementing Lean Six Sigma. Jakarta: Gramedia Pustaka Utama.

Hines, P. dan Rich, N. (1997) “The Seven Value Stream Mapping Tools,” International Journal of Operations and Production Management, 17(1), hal. 46–64. doi: 10.1108/01443579710157989.

Kusuma, S. A. (2010) Penerapan Lean Manufacturing dalam Mengidentifikasi dan Meminimasi Waste di PT. Hilton Surabaya. Universitas Pembangunan Nasional “Veteran” Jawa Timur.

Martin, K. dan Osterling, M. (2014) Value Stream Mapping. New York: McGraw-Hill.

Nash, M. A. dan Poling, S. R. (2008) Mapping the Total Value Stream. New York: CRC Press.

Rawabdeh, I. A. (2005) “A Model for the Assessment of Waste in Job Shop Environments,” International Journal of Operations and Production Management, 25(8), hal. 800–822. doi: 10.1108/01443570510608619.

Rother, M. dan Shook, J. (1999) Learning to See Value Stream Mapping to Create Value and Eliminate Muda. 1 ed. Brookline: The Lean Enterprise Institute.

Utama, D. M., Dewi, S. K. dan Mawarti, V. I. (2016) “Identifikasi Waste pada Proses Produksi Key Set Clarinet dengan Pendekatan Lean Manufacturing,” Jurnal Ilmiah Teknik Industri, 15(1), hal. 36–46. doi: 10.23917/jiti.v15i1.1572.

Womack, J. P. dan Jones, D. T. (2003) Lean Thinking: Banish Waste and Create Wealth in Your Corporation. 2 ed. New York: Free Press. doi: 10.1007/BF01807056.



  • There are currently no refbacks.