Analisa Total Productive Maintenance terhadap Produktivitas Kapal/Armada Menggunakan Metode Overall Equipment Effectiveness pada PT. Global Trans Energy International

Astrid Diandra Maulidina, Erry Rimawan, Muhammad Kholil


Industrial development in the coal mining sector is a government effort to increase the foreign exchange. By seeing the potential, the marine transportation service company for the bulk cargo of coal, the company has a problem that is often happening in customer satisfaction, one of it is low efficiency and effectivity of the ship due to incompetence in the maintenance management of the ship appropriately. By calculating the productivity of the ship by using Overall Equipment Effectiveness (OEE) method is expected to improve the efficiency and effectiveness of the ship. The measurement is done by calculating the level of Availability Rate, Performance Rate, and Quality Yield. From the measurement, we can see Six Big Losses to facilitate in identifying the causes of the productivity which is below the standard ideal value. During January - December 2014 Overall Equipment Effectiveness values are ranged from 73.63% to 88.05% with an average value 80.58%. This proves that the ship operations throughout 2014 have not reached the ideal state yet. Seen from the value obtained is lower than the ideal standard is ≥85%. The cause of OEE low value is due to the effect of idling and minor stoppages amounted to 2.69% and 1.91% losses breakdown caused by Human, Methods, Engineering, and Environment factors.

Keywords: Efficiency, Effectivity, Productivity, Overall Equipment Effectiveness, Six Big Losses.

Full Text:



Almeanazel, Osama Taisir R. 2010. Total Productive Maintenance Review and Overall Equipment Effectiveness Measurement. Jordan Journal of Mechanical and Industrial Engineering, Volume 4, Number 4, September 2010, Pages 517–522, ISSN 1995-6665.

Assauri, S. 2008. Manajemen Produksi dan Operasi. Jakarta: Lembaga Penerbit Fakultas Ekonomi Universitas Indonesia.

Betrianis et al. 2005. Pengukuran Nilai Overall Equipment Effectiveness Sebagai Dasar Usaha Perbaikan Proses Manufaktur Pada Lini Produksi. Jurusan Teknik Industri, Fakultas Teknologi Industri, Universitas Kristen Petra, Vol. 7 No. 2.

Borris, S.2006. Total Productive Maintenance.Mc Graw-Hill Companies. USA

Gupta, Amit Kumar and Dr. R. K. Garg. 2012. OEE Improvement by TPM Implementation: A Case Study. International Journal of IT, Engineering and Applied Sciences Research (IJIEASR) ISSN: 2319-4413 Volume 1, No. 1.

Lidley R.Higgins and R.Keith Mobley. 2002. Maintenance Engineering

Handbook, 6th edition. McGrawHill Com. New York.

Rahmad et al. 2012. Penerapan Overall Equipment Effectiveness (OEE) Dalam Implementasi Total Productive Maintenance (TPM) (Studi Kasus di Pabrik Gula PT. “Y”). Jurnal Rekayasa Mesin Vol.3, No.3 Tahun 2012 : 431-437. ISSN 0216-468X

Subiyono. 2000. Manajemen Perawatan. Bab 1 hlm. 2. Bandung: Politeknik

The Japan Insitute of Plant Maintenance (terjemahan Fatchurozak Autonomous

Maintenance for operation)

Wahjudi, Didik, Soejono Tjitro, dan Rhismawati Soeyono. 2009. Studi Kasus Peningkatan Overall Equipment Effectiveness (OEE) Melalui Implementasi Total Productive Maintenance (TPM). Seminar Nasional Teknik Mesin IV.

Wakjira., Melesse, Workneh, and Ajit Pal Singh. 2012. Total Productive Maintenance: A Case Study in Manufacturing Industry. Global Journal of researches in engineering Industrial Engineering, Volume 12 Issue 1 Version 1.0 February 2012, Online ISSN: 2249-4596, Print ISSN:0975-5861.



  • There are currently no refbacks.