JIEMS (Journal of Industrial Engineering and Management Systems)

This research uses the Overall Equipment Effectiveness (OEE) method to measure the blowing machine effectiveness at the plastic bottle manufacturing plant. This paper investigates losses that gave the biggest impact on machine effectiveness value. Afterwards analytical methods are used in this paper, using Failure Mode and Effect Analysis (FMEA) and Logic Tree Analysis (LTA). Both methods identify as many causes as the failure that can decrease machine effectiveness. OEE value was influenced by low-performance efficiency. Failure that most affect the effectiveness of the machine is shown by factors with the value of Risk Priority Number (RPN) above the critical value.

Overall Equipment Effectiveness; Failure Mode and Effect Analysis; Logic Tree analysis

Ansori, N. dan Mustajib, M. I. (2013) Sistem Perawatan Terpadu. 1 ed. Yogyakarta: Graha Ilmu.

Asisco, H., Amar, K. dan Perdana, Y. R. (2012) “Usulan Perencanaan Perawatan Mesin dengan Metode Reliability Centered Maintenance (RCM) di PT. Perkebunan Nusantara VII (Persero) Unit Usaha Sungai Niru Kab. Muara Enim,” Kaunia, 8(2), hal. 78–98.

Chand, G. dan Shirvani, B. (2000) “Implementation of TPM in Cellular Manufacture,” Journal of Materials Processing Technology, 103(1), hal. 149–154. doi: 10.1016/S0924-0136(00)00407-6.

Deshpande, V. S. dan Modak, J. P. (2002) “Application of RCM to a Medium Scale Industry,” Reliability Engineering and System Safety, 77(1), hal. 31–43. doi: 10.1016/S0951-8320(02)00011-X.

Muchiri, P. dan Pintelon, L. (2008) “Performance Measurement Using Overall Equipment Effectiveness (OEE): Literature Review and Practical Application Discussion,” International Journal of Production Research, 46(13), hal. 3517–3535. doi: 10.1080/00207540601142645.

Rahmad, Pratikto dan Wahyudi, S. (2012) “Penerapan Overall Equipment Effectiveness (OEE) dalam Implementasi Total Productive Maintenance (TPM) (Studi Kasus di Pabrik Gula PT. ‘Y’),” Jurnal Rekayasa Mesin, 3(3), hal. 431–437.

Stamatis, D. H. (2015) The ASQ Pocket Guide to Failure Mode and Effect Analysis (FMEA). Milwaukee: American for Quality, Quality Press.

Stephens, M. P. (2010) Productivity and Reliability-based Maintenance Management. Purdue University Press.

Yumaida (2011) Analisis Risiko Kegagalan Pemeliharaan pada Pabrik Pengolahan Pupuk NPK Granular (Studi Kasus: PT. Pupuk Kujang Cikampek). Universitas Indonesia.